PartsTable
Technical Data Sheet
Download PDF

122757 — KIT,SOLENOID REPAIR

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

122757: KIT,SOLENOID REPAIR.

The KIT,SOLENOID REPAIR is a Hama industrial component. Key specifications include hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.500 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, aperture_diameter: 1.200 INCHES NOMINAL IN, gage_ring_thickness: 0.090 INCHES NOMINAL IN, outside_corner_radius: 0.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-631-4661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122757
NSN: 5330-00-631-4661
NIINs: 006314661, 012379169, 012784827
FSC: 5330 — Packing and Gasket Materials
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.500 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
aperture_diameter1.200 INCHES NOMINAL IN
gage_ring_thickness0.090 INCHES NOMINAL IN
outside_corner_radius0.344 INCHES NOMINAL IN
cross-sectional_thickness0.130 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.344 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-631-4661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 122757 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.130 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.090 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.200 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.130 INCHES NOMINAL IN
GAGE RING THICKNESS0.090 INCHES NOMINAL IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH2.500 INCHES NOMINAL IN
APERTURE DIAMETER1.200 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.344 INCHES NOMINAL IN
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.344 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 122757?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122757?
122757 is a KIT,SOLENOID REPAIR manufactured by Hama.
What is the NSN for 122757?
122757 is cataloged in the U.S. Government catalog under NSN 5330-00-631-4661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122757

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.