PartsTable
Technical Data Sheet
Download PDF

12274872 — PAD EYE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12274872: PAD EYE.

The PAD EYE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, style_designator: RECTANGULAR, eye_inside_diameter: 1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN, eye_stock_thickness: 1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN, material_document_and_classification: QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-201-4811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12274872
NSN: 5340-01-201-4811
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
style_designatorRECTANGULAR
eye_inside_diameter1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN
eye_stock_thickness1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-201-4811
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12274872 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
EYE INSIDE DIAMETER: 1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN
•
EYE STOCK THICKNESS: 1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 4130 OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
EYE INSIDE DIAMETER1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM IN
EYE STOCK THICKNESS1.690 INCHES MINIMUM AND 1.810 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4130 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12274872?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12274872?
12274872 is a PAD EYE.
What is the NSN for 12274872?
12274872 is cataloged in the U.S. Government catalog under NSN 5340-01-201-4811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12274872