PartsTable
Technical Data Sheet
Download PDF

12268019 — PAD EYE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12268019: PAD EYE.

The PAD EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 3.930 INCHES NOMINAL IN, pad_thickness: 1.120 INCHES NOMINAL IN, overall_length: 4.370 INCHES NOMINAL IN, style_designator: OVAL, eye_inside_diameter: 1.620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-097-0722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12268019
NSN: 5340-01-097-0722
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width3.930 INCHES NOMINAL IN
pad_thickness1.120 INCHES NOMINAL IN
overall_length4.370 INCHES NOMINAL IN
style_designatorOVAL
eye_inside_diameter1.620 INCHES NOMINAL IN
eye_stock_thickness0.750 INCHES NOMINAL IN
end_item_identification2350-01-061-2445 TANK,COMBAT,M1
distance_between_eye_centerline_and_pad_bottom5.620 INCHES NOMINAL IN
NSN5340-01-097-0722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12268019 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OVAL
•
EYE INSIDE DIAMETER: 1.620 INCHES NOMINAL IN
•
EYE STOCK THICKNESS: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DISTANCE BETWEEN EYE CENTERLINE AND PAD BOTTOM: 5.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROVAL
OVERALL LENGTH4.370 INCHES NOMINAL IN
OVERALL WIDTH3.930 INCHES NOMINAL IN
EYE INSIDE DIAMETER1.620 INCHES NOMINAL IN
END ITEM IDENTIFICATION2350-01-061-2445 TANK,COMBAT,M1
EYE STOCK THICKNESS0.750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DISTANCE BETWEEN EYE CENTERLINE AND PAD BOTTOM5.620 INCHES NOMINAL IN
PAD THICKNESS1.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12268019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12268019?
12268019 is a PAD EYE.
What is the NSN for 12268019?
12268019 is cataloged in the U.S. Government catalog under NSN 5340-01-097-0722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12268019