PartsTable
Technical Data Sheet
Download PDF

12266909 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12266909: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: CARBON OVERALL, inner_groove_depth: 0.130 INCHES NOMINAL IN, inner_groove_width: 0.230 INCHES NOMINAL IN, peripheral_diameter: 2.140 INCHES NOMINAL IN, center_hole_diameter: 1.750 INCHES NOMINAL IN, cross-sectional_height: 0.436 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-068-6373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12266909
NSN: 5330-01-068-6373
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialCARBON OVERALL
inner_groove_depth0.130 INCHES NOMINAL IN
inner_groove_width0.230 INCHES NOMINAL IN
peripheral_diameter2.140 INCHES NOMINAL IN
center_hole_diameter1.750 INCHES NOMINAL IN
cross-sectional_height0.436 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-01-068-6373
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12266909 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.436 INCHES NOMINAL IN
•
INNER GROOVE DEPTH: 0.130 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.140 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.230 INCHES NOMINAL IN
•
COLOR: BLACK
•
CENTER HOLE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: CARBON OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.436 INCHES NOMINAL IN
INNER GROOVE DEPTH0.130 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER2.140 INCHES NOMINAL IN
INNER GROOVE WIDTH0.230 INCHES NOMINAL IN
COLORBLACK
CENTER HOLE DIAMETER1.750 INCHES NOMINAL IN
MATERIALCARBON OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
48109Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
957C048109Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12266909?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12266909?
12266909 is a PACKING,PREFORMED.
What parts can replace 12266909?
There are 2 known substitutes for 12266909: 48109, 957C048109. Substitute compatibility should be verified for your specific system.
What is the NSN for 12266909?
12266909 is cataloged in the U.S. Government catalog under NSN 5330-01-068-6373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12266909