12266814: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, fastener_length: 1.800 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-085-1012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FILLISTER |
| head_height | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| thread_class | 2A A |
| head_diameter | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN |
| thread_length | 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN |
| screw_material | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L |
| fastener_length | 1.800 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.112 INCHES IN |
| minimum_tensile_strength | 80000 POUNDS PER SQUARE INCH LBS |
| thread_quantity_per_inch | 40 |
| NSN | 5305-01-085-1012 |
| HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| FASTENER LENGTH | 1.800 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE AND 66 FED SPEC 1ST MATERIAL RESPONSE |
| THREAD LENGTH | 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.112 INCHES IN |
| HEAD STYLE | FILLISTER |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L |
| SPECIAL FEATURES | PASSIVATED PER FEDERAL SPECIFICA TION QQ-P-35;RECESS CONFORMS TO MS9006DRIVER SIZE NUMBER 1;MAGNETIC PERMEAB ILITY:2.0 MAX(AIR-1.0)FOR A FIELD STRENGTH OF H-2000 OERSTEDS USING A MAGNETIC INDICATOR PER MIL-I-17214; DIMENSIONAL LIMITS AND SURFACE TEXTUREDESIGNATIONS APPLY AFTER PASSIVATION |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH LBS |