PartsTable
Technical Data Sheet
Download PDF

12255514 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12255514: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.120 INCHES NOMINAL IN, diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLUSH, chamfer_length: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-056-5180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12255514
NSN: 5315-01-056-5180
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.120 INCHES NOMINAL IN
diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLUSH
chamfer_length0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.500 INCHES NOMINAL IN
under_head_length0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
NSN5315-01-056-5180
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12255514 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
DIAMETER: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HEAD STYLE: FLUSH
•
HEIGHT: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.500 INCHES NOMINAL IN
DIAMETER0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD STYLEFLUSH
HEIGHT0.120 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12255514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12255514?
12255514 is a PIN,STRAIGHT,HEADED.
What is the NSN for 12255514?
12255514 is cataloged in the U.S. Government catalog under NSN 5315-01-056-5180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12255514