PartsTable
Technical Data Sheet
122533 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

- For transmitting audio and video signals e.g. between an antenna socket, a satellite receiver and a television<br>- Flexible materials guarantee optimum kink protection and prevent cable breakage<br>- Triple shielding for very good reduction of electromagnetic interference<br>- High-quality materials and shielded lines for excellent picture and sound quality without interference<br>- Ferrite core for decimating remaining interference and for a good signal transmission<br>- Gold-plated plug with low contact resistance for secure signal transmission<br>- Large screw head makes mounting with a spanner easier<br>- 100-decibel screening rate (extremely dense braiding + double-layer shielding foil) for protection from electromagnetic interference<br>- For devices with an F connection This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-248-1510, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 122533
NSN: 5998-00-248-1510
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
overall_width1.090 INCHES NOMINAL IN
overall_height0.060 INCHES NOMINAL IN
overall_length2.580 INCHES NOMINAL IN
NSN5998-00-248-1510
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 122533 MFR Hama 122533
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.090 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR,FIXED 3; CONTACT,CONNECTOR 9; EYELET,FUNNEL FLANGE 6; INSULATION SLEEVE,ELEC 2; PRINTED WIRING BOARD 1; RESISTOR,FIXED 4; SEMICONDUCTOR,DIODE 4; SCREW,MACHINE-FLAT HEAD 1; TERMINAL,STUD,DOUBLE TURRET 17; TRANSFORMER,STEP DOWN 1; WASHER,INSULATING 2
OVERALL HEIGHT0.060 INCHES NOMINAL IN
OVERALL LENGTH2.580 INCHES NOMINAL IN
OVERALL WIDTH1.090 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR,FIXED 3; CONTACT,CONNECTOR 9; EYELET,FUNNEL FLANGE 6; INSULATION SLEEVE,ELEC 2; PRINTED WIRING BOARD 1; RESISTOR,FIXED 4; SEMICONDUCTOR,DIODE 4; SCREW,MACHINE-FLAT HEAD 1; TERMINAL,STUD,DOUBLE TURRET 17; TRANSFORMER,STEP DOWN 1; WASHER,INSULATING 2
OVERALL HEIGHT0.060 INCHES NOMINAL IN
OVERALL LENGTH2.580 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1-958082-001Interchangeable
interchangeable cross-reference
interchangeable
8210-1135Interchangeable
interchangeable cross-reference
interchangeable
RELEASE5285Interchangeable
interchangeable cross-reference
interchangeable
102725Interchangeable
interchangeable cross-reference
interchangeable
BM-924741-10272 5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 122533?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122533?
122533 is a 122533 manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 122533?
There are 5 known substitutes for 122533: 1-958082-001, 8210-1135, RELEASE5285 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122533?
122533 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-248-1510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122533