PartsTable
Technical Data Sheet
Download PDF

122519 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

122519: PLUG,PROTECTIVE,DUST AND MOISTUR.

- For transmitting audio and video signals e.g. between an antenna socket and a television - Double shielding for good reduction of electromagnetic interference - Shielded lines for optimum picture and sound quality without interference - Large screw head makes mounting with a spanner easier - 90-decibel screening rate (dense braiding + extra strong shielding foil) for protection from electromagnetic interference This part is cataloged in the U.S. Government catalog under NSN 5340-01-307-4395, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
122519
NSN: 5340-01-307-4395
FSC: 5340 — Hardware, Commercial
CAGE: Z4732 — HAULMARK TRAILERS (AUSTRALIA) PTY LTD (AUS)
SPECIFICATIONS
materialPLASTIC POLYURETHANE
design_typeFRICTION
overall_diameter1.310 INCHES NOMINAL IN
special_featuresDISTANCE BETWEEN PLUG CENTER TO HOLE CENTER ALONG THE LG IS 6.000 IN.; 0.840 IN. HOLE DIA OPPOSITE END OF PLUG,COLOR-OPTIONAL IN
NSN5340-01-307-4395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 122519 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.310 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYURETHANE
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.310 INCHES NOMINAL IN
SPECIAL FEATURESDISTANCE BETWEEN PLUG CENTER TO HOLE CENTER ALONG THE LG IS 6.000 IN.; 0.840 IN. HOLE DIA OPPOSITE END OF PLUG,COLOR-OPTIONAL IN
MATERIALPLASTIC POLYURETHANE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
82.51220-0037Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
13229E0887-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
95825K53Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H3-66MSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M1503-718010Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 122519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122519?
122519 is a PLUG,PROTECTIVE,DUST AND MOISTUR manufactured by Hama.
What parts can replace 122519?
There are 5 known substitutes for 122519: 82.51220-0037, 13229E0887-2, 95825K53 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122519?
122519 is cataloged in the U.S. Government catalog under NSN 5340-01-307-4395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122519