PartsTable
Technical Data Sheet
Download PDF

1222A11 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1222A11: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4150 INNER RING, bore_shape: STRAIGHT, contact_angle: 35.0 DEGREES NOMINAL, load_direction: ANGULAR, inner_ring_width: 2.3600 INCHES MINIMUM AND 2.3900 INCHES MAXIMUM IN, outer_ring_width: 3.1100 INCHES MINIMUM AND 3.1400 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-414-1805, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1222A11
NSN: 3110-01-414-1805
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0HRJ8 — KAYDON CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4150 INNER RING
bore_shapeSTRAIGHT
contact_angle35.0 DEGREES NOMINAL
load_directionANGULAR
inner_ring_width2.3600 INCHES MINIMUM AND 2.3900 INCHES MAXIMUM IN
outer_ring_width3.1100 INCHES MINIMUM AND 3.1400 INCHES MAXIMUM IN
features_providedLUBRICATION HOLE
lubrication_materialGREASE
overall_outside_diameter24.5600 INCHES MINIMUM AND 24.5700 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-414-1805
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1222A11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 3.1100 INCHES MINIMUM AND 3.1400 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 24.5600 INCHES MINIMUM AND 24.5700 INCHES MAXIMUM IN
•
FEATURES PROVIDED: LUBRICATION HOLE
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 35.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: STEEL COMP E52100 BALL
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH3.1100 INCHES MINIMUM AND 3.1400 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER24.5600 INCHES MINIMUM AND 24.5700 INCHES MAXIMUM IN
FEATURES PROVIDEDLUBRICATION HOLE
BORE SHAPESTRAIGHT
CONTACT ANGLE35.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
MATERIALSTEEL COMP E52100 BALL
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE RETAINER
MATERIALSTEEL COMP 4150 INNER RING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
14636-5001-103Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1222A11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1222A11?
1222A11 is a BEARING,BALL,ANNULAR.
What parts can replace 1222A11?
There is 1 known substitute for 1222A11: 14636-5001-103. Substitute compatibility should be verified for your specific system.
What is the NSN for 1222A11?
1222A11 is cataloged in the U.S. Government catalog under NSN 3110-01-414-1805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1222A11