PartsTable
Technical Data Sheet
Download PDF

122032 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

122032: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: YELLOW, wall_thickness: 0.058 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN, inside_diameter: 0.376 INCHES NOMINAL IN, outside_diameter: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, operating_pressure: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-543-2705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122032
NSN: 5310-00-543-2705
NIINs: 005432705, 006960195, 016149801, 016555114
FSC: 5310 — Nuts and Washers
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorYELLOW
wall_thickness0.058 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
inside_diameter0.376 INCHES NOMINAL IN
outside_diameter0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure950.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationPUMP, FUEL TR
media_for_which_designedAIR SINGLE RESPONSE
cross-sectional_shape_styleROUND
measuring_method_and_length100.0 FEET NOMINAL OVERALL FT
part_name_assigned_by_controlling_agencyHOSE ASSY, 24"
NSN5310-00-543-2705
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 122032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.683 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HOLE DIAMETER: 0.382 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.683 INCHES MAXIMUM IN
MATERIAL THICKNESS0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HOLE DIAMETER0.382 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
678111Reference document
Same NSN cross-reference
Reference document — Secondary reference
439969PC5Reference document
Same NSN cross-reference
Reference document — Secondary reference
PC120380Reference document
Same NSN cross-reference
Reference document — Secondary reference
120380Reference document
Same NSN cross-reference
Reference document — Secondary reference
MPD9576-57-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
3616V007Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 122032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122032?
122032 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 122032?
There are 10 known substitutes for 122032: 678111, 439969PC5, PC120380 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122032?
122032 is cataloged in the U.S. Government catalog under NSN 5310-00-543-2705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.