PartsTable
Technical Data Sheet
PartsTable / MRO / 122-95
122-95 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 12L14 OVERALL, head_style: FLAT COUNTERSUNK, point_type: CONVENTIONAL, seat_angle: 37.0 DEGREES, wheel_type: BUILT UP, plate_style: RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-065-4585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 122-95
NSN: 5305-00-065-4585
FSC: 5305
CAGE: 03024 — SENIOR OPERATIONS LLC DIV SENIOR AEROSPACE KETEMA (USA)
SPECIFICATIONS
materialSTEEL COMP 12L14 OVERALL
head_styleFLAT COUNTERSUNK
point_typeCONVENTIONAL
seat_angle37.0 DEGREES
wheel_typeBUILT UP
plate_styleRECTANGULAR
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length9.000 INCHES NOMINAL IN
thread_class2B INTERNAL
head_diameter0.260 INCHES NOMINAL IN
thread_length0.500 INCHES MINIMUM IN
NSN5305-00-065-4585
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 122-95 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD QUANTITY PER INCH: 32
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.260 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
SPECIAL FEATURES0.030 IN. MIN,0.034 IN. MAX DIA HOLE DRILLED 0.406IN. FROM HEAD END IN
THREAD LENGTH0.500 INCHES MINIMUM IN
INTERNAL DRIVE STYLESLOT
THREAD QUANTITY PER INCH32
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.260 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
110 1-25/64Interchangeable
interchangeable cross-reference
interchangeable
53189Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
56559Interchangeable
interchangeable cross-reference
interchangeable
12295Interchangeable
interchangeable cross-reference
interchangeable
9403370Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 122-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-95?
122-95 is a LEVER,REMOTE CONTROL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 122-95?
There are 9 known substitutes for 122-95: 110 1-25/64, 53189, 1302 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122-95?
122-95 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-065-4585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122-95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026