PartsTable
Technical Data Sheet
Download PDF

122-6776881PC34 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

122-6776881PC34: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_shape: ROUND, hole_diameter: 0.766 INCHES NOMINAL IN, overall_width: 2.000 INCHES NOMINAL IN, fork_span_width: 1.000 INCHES NOMINAL IN, special_features: LINK CONNECTOR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-488-8677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122-6776881PC34
NSN: 5340-01-488-8677
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_shapeROUND
hole_diameter0.766 INCHES NOMINAL IN
overall_width2.000 INCHES NOMINAL IN
fork_span_width1.000 INCHES NOMINAL IN
special_featuresLINK CONNECTOR
style_designatorCLEVIS
fork_arm_thickness0.500 INCHES NOMINAL IN
end_item_identificationHATCH BALLIST
distance_from_pivot_pinhole_center_to_rod_connection_end5.250 INCHES NOMINAL IN
NSN5340-01-488-8677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 122-6776881PC34 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.000 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH1.000 INCHES NOMINAL IN
FORK ARM THICKNESS0.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH2.000 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESLINK CONNECTOR
END ITEM IDENTIFICATIONHATCH BALLIST
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.766 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END5.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
6776881Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 122-6776881PC34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-6776881PC34?
122-6776881PC34 is a CLEVIS,ROD END.
What parts can replace 122-6776881PC34?
There is 1 known substitute for 122-6776881PC34: 6776881. Substitute compatibility should be verified for your specific system.
What is the NSN for 122-6776881PC34?
122-6776881PC34 is cataloged in the U.S. Government catalog under NSN 5340-01-488-8677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122-6776881PC34

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.