PartsTable
Technical Data Sheet
Download PDF

122-6722635 PC 13 — CLUTCH HALF,POSITIVE,NONVEHICULA

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

122-6722635 PC 13: CLUTCH HALF,POSITIVE,NONVEHICULA.

CLUTCH HALF,POSITIVE,NONVEHICULA. Key specifications include material: STEEL OVERALL, body_style: PLAIN, WITH LIGHTENING HOLES, bore_style: W/ KEYWAY FIRST END, tooth_form: STANDARD, pitch_diameter: 5.0000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-484-2032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122-6722635 PC 13
NSN: 3020-01-484-2032
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_stylePLAIN, WITH LIGHTENING HOLES
bore_styleW/ KEYWAY FIRST END
tooth_formSTANDARD
pitch_diameter5.0000 INCHES NOMINAL IN
pressure_angle14.5000 DEGREES
teeth_quantity40
special_featuresPART OF AIRCRAFT CARRIER ELEVATOR DOOR LOCKING MECHANISM
style_designatorPROTRUDING HUB
face_nominal_width0.500 INCHES IN
hub_nominal_diameter1.750 INCHES FIRST END IN
hub_style_designatorPLAIN FIRST END
NSN3020-01-484-2032
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CLUTCH HALF,POSITIVE,NONVEHICULA TITLE COMPONENT PN 122-6722635 PC 13 MFR CLUTCH HALF,POSITIVE,N
KEY FEATURES
•
KEYWAY NOMINAL WIDTH: 0.188 INCHES FIRST END IN
•
BORE NOMINAL DIAMETER: 0.843 INCHES FIRST END IN
•
HUB NOMINAL DIAMETER: 1.750 INCHES FIRST END IN
•
TEETH QUANTITY: 40
•
BODY STYLE: PLAIN, WITH LIGHTENING HOLES
•
BORE STYLE: W/ KEYWAY FIRST END
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 1.000 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
TECHNICAL CHARACTERISTICS
KEYWAY NOMINAL WIDTH0.188 INCHES FIRST END IN
BORE NOMINAL DIAMETER0.843 INCHES FIRST END IN
HUB NOMINAL DIAMETER1.750 INCHES FIRST END IN
TEETH QUANTITY40
BODY STYLEPLAIN, WITH LIGHTENING HOLES
BORE STYLEW/ KEYWAY FIRST END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END1.000 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER5.0000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
122-6722635 PC 80Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6818601Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
6722635Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 122-6722635 PC 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-6722635 PC 13?
122-6722635 PC 13 is a CLUTCH HALF,POSITIVE,NONVEHICULA.
What parts can replace 122-6722635 PC 13?
There are 3 known substitutes for 122-6722635 PC 13: 122-6722635 PC 80, 6818601, 6722635. Substitute compatibility should be verified for your specific system.
What is the NSN for 122-6722635 PC 13?
122-6722635 PC 13 is cataloged in the U.S. Government catalog under NSN 3020-01-484-2032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122-6722635 PC 13