PartsTable
Technical Data Sheet
122-275 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- For transmitting analogue audio signals e.g. between a CD player and an amplifier<br>- Shielded lines for optimum sound quality without interference<br>- Colour coding on the inside of the plugs for easy connecting<br>- For devices with an analogue RCA connection This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5043, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122-275
NSN: 5330-00-599-5043
FSC: 5330
CAGE: 51829 — CR INDUSTRIES CHICAGO RAWHIDE MFG CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.688 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-599-5043
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 122-275 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: SQUARE
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
MATERIAL: STEEL CASE
SEAL WIDTH: 0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER: 1.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
50186Interchangeable
interchangeable cross-reference
interchangeable
9-1254-151Interchangeable
interchangeable cross-reference
interchangeable
23704Interchangeable
interchangeable cross-reference
interchangeable
10M075Interchangeable
interchangeable cross-reference
interchangeable
TG2645Interchangeable
interchangeable cross-reference
interchangeable
P-186Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 122-275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-275?
122-275 is a SEAL,PLAIN ENCASED manufactured by Hama.
What parts can replace 122-275?
There are 17 known substitutes for 122-275: 50186, 9-1254-151, 23704 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122-275?
122-275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-5043. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122-275