PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 122-2422417 PIECE 275
122-2422417 PIECE 275 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.690 INCHES NOMINAL IN, first_hole_diameter: 0.041 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN, pin_overall_diameter: 0.4730 INCHES MINIMUM AND 0.4760 INCHES MAXIMUM IN, second_hole_diameter: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-481-3157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
122-2422417 PIECE 275
NSN: 5315-01-481-3157
FSC: 5315
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
first_end_styleCHAMFERED
pin_overall_length2.690 INCHES NOMINAL IN
first_hole_diameter0.041 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
pin_overall_diameter0.4730 INCHES MINIMUM AND 0.4760 INCHES MAXIMUM IN
second_hole_diameter0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.060 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
end_item_identificationMARINE HARDWARE AND HULL DOORS
material_document_and_classificationQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-481-3157
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 122-2422417 PIECE 275 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.041 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 2.168 INCHES MINIMUM AND 2.208 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.041 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATIONMARINE HARDWARE AND HULL DOORS
MATERIALSTEEL CORROSION RESISTING OVERALL
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
CENTER TO CENTER DISTANCE BETWEEN HOLES2.168 INCHES MINIMUM AND 2.208 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.250 INCHES NOMINAL IN
SECOND HOLE DIAMETER0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
122-5277661 ITEM 33Interchangeable
interchangeable cross-reference
interchangeable
122-2422386 PIECE 278Interchangeable
interchangeable cross-reference
interchangeable
MS24665-370Interchangeable
interchangeable cross-reference
interchangeable
FFP386Interchangeable
interchangeable cross-reference
interchangeable
MS24665-516Interchangeable
interchangeable cross-reference
interchangeable
122-2298838 PIECE 201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 122-2422417 PIECE 275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-2422417 PIECE 275?
122-2422417 PIECE 275 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 122-2422417 PIECE 275?
There are 18 known substitutes for 122-2422417 PIECE 275: 122-5277661 ITEM 33, 122-2422386 PIECE 278, MS24665-370 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 122-2422417 PIECE 275?
122-2422417 PIECE 275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-481-3157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 122-2422417 PIECE 275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026