Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW
<b>Reliable serial signal extension:</b>The extension enables stable expansion of existing RS232, RS422 or RS485 connections between system components with a 9-pin Sub-D interface.<br><b>1:1 assigned for direct signal transmission:</b>All pins are connected one-to-one and enable unaltered transmission without cross-wiring.<br><b>9-pin Sub-D plug to socket:</b>The assembly with 9-pin plug and 9-pin socket allows easy extension of existing DB9 connections.<br><b>Moulded connector design:</b>The moulded connectors support a mechanically stable connection and increase resistance in daily use.<br><b>Flexible length options:</b>Available in 2 metres, 3 metres, 5 metres, 7 metres, 10 metres, 15 metres and 20 metres for installations tailored to your needs.<br><br>The InLine® serial extension with 9-pin Sub-D plug to 9-pin Sub-D socket is used to extend existing serial interfaces. It is suitable for RS232, RS422 and RS485 connections between peripheral devices, data switches and PC or server s This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-050-2707, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO→MRO_GENERAL→122-1-4
NSN:5930-00-050-2707 FSC:5930 CAGE:88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
length
0.438 INCHES NOMINAL SQUARE END IN
material
STEEL OVERALL
body_style
BUSHING MOUNT
body_width
1.250 INCHES NOMINAL IN
point_type
CONVENTIONAL
body_height
1.025 INCHES NOMINAL IN
body_length
1.346 INCHES NOMINAL IN
point_angle
118.0 DEGREES NOMINAL
shank_style
STANDARD TAPER W/TANG
flute_length
5.375 INCHES NOMINAL IN
overall_width
0.860 MILLIMETERS MAXIMUM MM
physical_form
GAS
NSN
5930-00-050-2707
COMPONENT DIAGRAM
KEY FEATURES
•
BODY LENGTH: 1.346 INCHES NOMINAL IN
•
SWITCH ACTUATOR QUANTITY: 1
•
BODY STYLE: BUSHING MOUNT
•
TERMINAL TYPE AND QUANTITY: 6 TAB, SOLDER LUG
•
NONPILE-UP CONTACT ARRANGEMENT: 2 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
•
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 20.000 AMPERES RESISTIVE DC AND 10.000 AMPERES RESISTIVE AC
•
THREAD SERIES DESIGNATOR: UNS
•
BUSHING LENGTH: 0.468 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY LENGTH
1.346 INCHES NOMINAL IN
SWITCH ACTUATOR QUANTITY
1
BODY STYLE
BUSHING MOUNT
TERMINAL TYPE AND QUANTITY
6 TAB, SOLDER LUG
NONPILE-UP CONTACT ARRANGEMENT
2 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE
20.000 AMPERES RESISTIVE DC AND 10.000 AMPERES RESISTIVE AC
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 122-1-4?
122-1-4 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What parts can replace 122-1-4?
There are 34 known substitutes for 122-1-4: 710660, SC3978PC4, 15943J and 31 more. Substitute compatibility should be verified for your specific system.
Is 122-1-4 still available?
122-1-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.