PartsTable
Technical Data Sheet
Download PDF

12193-6125 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12193-6125: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include shape: SQUARE, width: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, material: PLASTIC POLYURETHANE CUSHIONING, thickness: 0.93 INCHES NOMINAL IN, overall_height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, mounting_method: ADHESIVE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-723-4467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12193-6125
NSN: 5340-01-723-4467
FSC: 5340 — Hardware, Commercial
CAGE: 7QAK7 — L3HARRIS GLOBAL COMMUNICATIONS, INC. DBA HARRIS CORP (USA)
SPECIFICATIONS
shapeSQUARE
width0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
materialPLASTIC POLYURETHANE CUSHIONING
thickness0.93 INCHES NOMINAL IN
overall_height0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
mounting_methodADHESIVE
end_item_identification5820-01-679-7241
part_name_assigned_by_controlling_agencyPORON PAD, HINGE FLEX MOUNTING
NSN5340-01-723-4467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12193-6125 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: ADHESIVE
•
SHAPE: SQUARE
•
WIDTH: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYURETHANE CUSHIONING
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
MOUNTING METHODADHESIVE
SHAPESQUARE
SPECIAL FEATURESALL APPEARANCE STANDARDS SHALL BE IN ACCORDANCE WITH HARRIS/RF COMMUNICATIONS SPECIFICATION MQC-522. FOAM: ROGERS CORP URETHANE FOAM 4701-30-20093-04 PSA: 3M ADHESIVE 9471 WITH PEEL OFF LINER INTACT, ON BOTH SIDES. PADS TO BE KISS CUT FOR EASY REMOVAL AND
WIDTH0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPORON PAD, HINGE FLEX MOUNTING
END ITEM IDENTIFICATION5820-01-679-7241
MATERIALPLASTIC POLYURETHANE CUSHIONING
THICKNESS0.93 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12193-6125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12193-6125?
12193-6125 is a PAD,CUSHIONING.
What is the NSN for 12193-6125?
12193-6125 is cataloged in the U.S. Government catalog under NSN 5340-01-723-4467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12193-6125