PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1218N92
1218N92 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.890 INCHES NOMINAL IN, material: STEEL, overall_height: 2.047 INCHES NOMINAL IN, stock_diameter: 0.079 INCHES NOMINAL IN, style_designator: PIN, surface_treatment: CADMIUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-828-3632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1218N92
NSN: 5340-00-828-3632
FSC: 5340
CAGE: 3D6E9 — MERITOR INDUSTRIAL PRODUCTS, LLC (USA)
SPECIFICATIONS
width0.890 INCHES NOMINAL IN
materialSTEEL
overall_height2.047 INCHES NOMINAL IN
stock_diameter0.079 INCHES NOMINAL IN
style_designatorPIN
surface_treatmentCADMIUM
casehardening_indicatorNOT CASEHARDENED
NSN5340-00-828-3632
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1218N92 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM
•
STYLE DESIGNATOR: PIN
•
MATERIAL: STEEL
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 0.890 INCHES NOMINAL IN
•
STOCK DIAMETER: 0.079 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM
STYLE DESIGNATORPIN
MATERIALSTEEL
CASEHARDENING INDICATORNOT CASEHARDENED
OVERALL HEIGHT2.047 INCHES NOMINAL IN
WIDTH0.890 INCHES NOMINAL IN
STOCK DIAMETER0.079 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
N8-2Interchangeable
interchangeable cross-reference
interchangeable
0209985-1Interchangeable
interchangeable cross-reference
interchangeable
230433Interchangeable
interchangeable cross-reference
interchangeable
10006Interchangeable
interchangeable cross-reference
interchangeable
10813Interchangeable
interchangeable cross-reference
interchangeable
15120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1218N92?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1218N92?
1218N92 is a CLIP,RETAINING.
What parts can replace 1218N92?
There are 18 known substitutes for 1218N92: N8-2, 0209985-1, 230433 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1218N92?
1218N92 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-828-3632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1218N92

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026