PartsTable
Technical Data Sheet
Download PDF

12186-1701-02 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12186-1701-02: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 0.354 INCHES NOMINAL IN, length: 0.636 INCHES NOMINAL IN, material: POLYURETHANE FOAM (USE PCAH00) AND (MRC ASWC) OVERALL, thickness: 0.062 INCHES NOMINAL IN, mounting_method: ADHESIVE TAPE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-714-5243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12186-1701-02
NSN: 5340-01-714-5243
FSC: 5340 — Hardware, Commercial
CAGE: 7QAK7 — L3HARRIS GLOBAL COMMUNICATIONS, INC. DBA HARRIS CORP (USA)
SPECIFICATIONS
shapeRECTANGULAR
width0.354 INCHES NOMINAL IN
length0.636 INCHES NOMINAL IN
materialPOLYURETHANE FOAM (USE PCAH00) AND (MRC ASWC) OVERALL
thickness0.062 INCHES NOMINAL IN
mounting_methodADHESIVE TAPE
special_features2 ROUNDED CORNERS;2 SQUARE CORNERS
end_item_identification5820-016709623
part_name_assigned_by_controlling_agencyPAD, FLEX
NSN5340-01-714-5243
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12186-1701-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.636 INCHES NOMINAL IN
•
MOUNTING METHOD: ADHESIVE TAPE
•
SHAPE: RECTANGULAR
•
WIDTH: 0.354 INCHES NOMINAL IN
•
MATERIAL: PLASTIC FOAM CUSHIONING
TECHNICAL CHARACTERISTICS
LENGTH0.636 INCHES NOMINAL IN
MOUNTING METHODADHESIVE TAPE
SHAPERECTANGULAR
SPECIAL FEATURES2 ROUNDED CORNERS;2 SQUARE CORNERS
WIDTH0.354 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPAD, FLEX
END ITEM IDENTIFICATION5820-016709623
MATERIALPLASTIC FOAM CUSHIONING
MATERIALPOLYURETHANE FOAM (USE PCAH00) AND (MRC ASWC) OVERALL
THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
12186-1701Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12186-1701-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12186-1701-02?
12186-1701-02 is a PAD,CUSHIONING.
What parts can replace 12186-1701-02?
There is 1 known substitute for 12186-1701-02: 12186-1701. Substitute compatibility should be verified for your specific system.
What is the NSN for 12186-1701-02?
12186-1701-02 is cataloged in the U.S. Government catalog under NSN 5340-01-714-5243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12186-1701-02