Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, cross-sectional_thickness: 0.188 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-470-3190, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter
0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
style_designator
CIRCULAR
aperture_diameter
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
cross-sectional_thickness
0.188 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
material_document_and_classification
ASTM D2000 4AA515 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN
5330-00-470-3190
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE DIAMETER: 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER POLYISOPRENE NATURAL CLASS NR OR RUBBER POLYISOPRENE SYNTHETIC CLASS IR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 4AA515 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.188 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER
0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
MATERIAL
RUBBER POLYISOPRENE NATURAL CLASS NR OR RUBBER POLYISOPRENE SYNTHETIC CLASS IR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
STYLE DESIGNATOR
CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 4AA515 ASSN STD ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL