PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1217-24
1217-24 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include end_item_identification: PUMP, FUEL TR, part_name_assigned_by_controlling_agency: HOSE ASSY, 20". This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3401, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1217-24
NSN: 3110-00-156-3401
FSC: 3110
CAGE: 81495 — KOEHRING CRANES, INC DBA TEREX CRANES DIV WAVERLY OPERATIONS (USA)
SPECIFICATIONS
end_item_identificationPUMP, FUEL TR
part_name_assigned_by_controlling_agencyHOSE ASSY, 20"
NSN3110-00-156-3401
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1217-24 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 8.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
•
BEARING SEAL TYPE: CONTACT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
•
SEAL QUANTITY: 2
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER8.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
BEARING SEAL TYPECONTACT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
OUTER RING WIDTH0.3150 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
25KL42Interchangeable
interchangeable cross-reference
interchangeable
0101-6-6Interchangeable
interchangeable cross-reference
interchangeable
481851Interchangeable
interchangeable cross-reference
interchangeable
RE48A324Interchangeable
interchangeable cross-reference
interchangeable
25F513Interchangeable
interchangeable cross-reference
interchangeable
809B6866-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1217-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1217-24?
1217-24 is a BEARING,BALL,ANNULAR.
What parts can replace 1217-24?
There are 22 known substitutes for 1217-24: 25KL42, 0101-6-6, 481851 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1217-24?
1217-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3401. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1217-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026