PartsTable
Technical Data Sheet
Download PDF

12167-1005 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12167-1005: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, end_item_identification: 5820-01-670-9623, material_document_and_classification: MIL-DTL-25988 TYPE 2 CLASS I GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: SEAL FRONT PANEL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-714-4837, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12167-1005
NSN: 5330-01-714-4837
NIINs: 017144837, 017144838, 017144839, 017146002
FSC: 5330 — Packing and Gasket Materials
CAGE: 7QAK7 — L3HARRIS GLOBAL COMMUNICATIONS, INC. DBA HARRIS CORP (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
end_item_identification5820-01-670-9623
material_document_and_classificationMIL-DTL-25988 TYPE 2 CLASS I GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencySEAL FRONT PANEL
NSN5330-01-714-4837
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12167-1005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-DTL-25988 TYPE 2 CLASS I GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
COLOR: BLUE
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ OVERALL
TECHNICAL CHARACTERISTICS
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-25988 TYPE 2 CLASS I GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
COLORBLUE
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,POWER AMPLIFIER
END ITEM IDENTIFICATION5820-01-670-9623
MATERIALRUBBER FLUOROSILICONE CLASS FQ OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12167-1005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12167-1005?
12167-1005 is a GASKET.
What is the NSN for 12167-1005?
12167-1005 is cataloged in the U.S. Government catalog under NSN 5330-01-714-4837. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12167-1005