PartsTable
Technical Data Sheet
Download PDF

121630 — BEARING,SLEEVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

121630: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OR STEEL CORROSION RESISTING, construction: LAMINATED, lamination_thickness: 0.003 INCHES NOMINAL IN, end_item_identification: DOOR ASSY/INSTL DIP STICK, material_document_and_classification: MIL-S-22499, COMP 1, T 2, CLS 2 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-012-1630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
121630
NSN: 5306-00-012-1630
NIINs: 000121630, 003921862, 013005183, 013615257, 014791444
FSC: 5306 — Bolts
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OR STEEL CORROSION RESISTING
constructionLAMINATED
lamination_thickness0.003 INCHES NOMINAL IN
end_item_identificationDOOR ASSY/INSTL DIP STICK
material_document_and_classificationMIL-S-22499, COMP 1, T 2, CLS 2 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5306-00-012-1630
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 121630 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.562 INCHES NOMINAL IN
•
THREAD LENGTH: 0.562 INCHES MAXIMUM IN
•
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
FASTENER LENGTH0.562 INCHES NOMINAL IN
THREAD LENGTH0.562 INCHES MAXIMUM IN
HARDNESS RATING100.0 ROCKWELL B MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.489 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 2 GRADE
SUBSTITUTES & CROSS-REFERENCES 2
MS35290-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFS85TYPE2STYLE10PGRADE2Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 121630?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 121630?
121630 is a BEARING,SLEEVE.
What parts can replace 121630?
There are 2 known substitutes for 121630: MS35290-30, FFS85TYPE2STYLE10PGRADE2. Substitute compatibility should be verified for your specific system.
What is the NSN for 121630?
121630 is cataloged in the U.S. Government catalog under NSN 5306-00-012-1630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 121630