PartsTable
Technical Data Sheet
Download PDF

1214LR1214A — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1214LR1214A: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 2.7553 INCHES MINIMUM AND 2.7559 INCHES MAXIMUM IN, overall_width: 0.9389 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-089-9214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1214LR1214A
NSN: 3110-01-089-9214
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter2.7553 INCHES MINIMUM AND 2.7559 INCHES MAXIMUM IN
overall_width0.9389 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
features_providedMOUNTING GROOVE
overall_outside_diameter4.9207 INCHES MINIMUM AND 4.9213 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.1
NSN3110-01-089-9214
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1214LR1214A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 4.9207 INCHES MINIMUM AND 4.9213 INCHES MAXIMUM IN
•
FEATURES PROVIDED: MOUNTING GROOVE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 2.7553 INCHES MINIMUM AND 2.7559 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
OVERALL WIDTH0.9389 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER4.9207 INCHES MINIMUM AND 4.9213 INCHES MAXIMUM IN
FEATURES PROVIDEDMOUNTING GROOVE
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER2.7553 INCHES MINIMUM AND 2.7559 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
12267713Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
908166Reference document
Same NSN cross-reference
Reference document — Secondary reference
1214X3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1214LR1214A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1214LR1214A?
1214LR1214A is a BEARING,BALL,ANNULAR.
What parts can replace 1214LR1214A?
There are 3 known substitutes for 1214LR1214A: 12267713, 908166, 1214X3. Substitute compatibility should be verified for your specific system.
What is the NSN for 1214LR1214A?
1214LR1214A is cataloged in the U.S. Government catalog under NSN 3110-01-089-9214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1214LR1214A