The 1214AS121 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 172, body_style: DOUBLE FLAIR ENTRY, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, overall_length: 6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM IN, surface_treatment: CADMIUM. This part is cataloged in the U.S.
Government catalog under NSN 5998-01-148-3355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→1214AS121
NSN:5998-01-148-3355 FSC:5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware CAGE:30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
material
COPPER ALLOY 172
body_style
DOUBLE FLAIR ENTRY
overall_width
0.500 INCHES NOMINAL IN
overall_height
0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
overall_length
6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM IN
surface_treatment
CADMIUM
unthreaded_mounting_hole_diameter
0.097 INCHES MINIMUM AND 0.101 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity
3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
material_document_and_classification
QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
NSN
5998-01-148-3355
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
•
BODY STYLE: DOUBLE FLAIR ENTRY
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.097 INCHES MINIMUM AND 0.101 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY
3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
OVERALL HEIGHT
0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
BODY STYLE
DOUBLE FLAIR ENTRY
UNTHREADED MOUNTING HOLE DIAMETER
0.097 INCHES MINIMUM AND 0.101 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH
6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM
MATERIAL
COPPER ALLOY 172
OTHER ITEMS IN FSC 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1214AS121?
1214AS121 is a 1214AS121. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1214AS121?
There is 1 known substitute for 1214AS121: 18B-14-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 1214AS121?
1214AS121 is cataloged in the U.S. Government catalog under NSN 5998-01-148-3355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.