PartsTable
Technical Data Sheet
Download PDF

121486 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

121486: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, head_height: 0.109 INCHES NOMINAL IN, point_style: FLAT, thread_class: 2A A, head_diameter: 0.280 INCHES NOMINAL IN, thread_length: 0.220 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0766, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
121486
NSN: 3110-00-100-0766
NIINs: 001000766, 012408886
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.109 INCHES NOMINAL IN
point_styleFLAT
thread_class2A A
head_diameter0.280 INCHES NOMINAL IN
thread_length0.220 INCHES NOMINAL IN
fastener_length0.440 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_diameter0.164 INCHES IN
first_diameter_from_head0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_quantity_per_inch32
NSN3110-00-100-0766
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 121486 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1965 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1965 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
0BT3381Reference document
Same NSN cross-reference
Reference document — Secondary reference
3381Reference document
Same NSN cross-reference
Reference document — Secondary reference
RD47246Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
164192Reference document
Same NSN cross-reference
Reference document — Secondary reference
705284Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
536867Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 121486?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 121486?
121486 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 121486?
There are 6 known substitutes for 121486: 0BT3381, 3381, RD47246 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 121486?
121486 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0766. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 121486