PartsTable
Technical Data Sheet
121468 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: BRONZE OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.687 INCHES MAXIMUM IN, body_diameter: 0.307 INCHES MAXIMUM IN, terminal_length: 1.625 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0649, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 121468
NSN: 3110-00-100-0649
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialBRONZE OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.687 INCHES MAXIMUM IN
body_diameter0.307 INCHES MAXIMUM IN
terminal_length1.625 INCHES MINIMUM IN
terminal_diameter0.025 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
end_item_identificationTEMP REG VALVE 1.00IPS 50T250 DEG F SBU BRZ
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
NSN3110-00-100-0649
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 121468 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
T43D-10MEGOHM-1PCTInterchangeable
interchangeable cross-reference
interchangeable
596Interchangeable
interchangeable cross-reference
interchangeable
M43D10M0HMP0RM1PCTInterchangeable
interchangeable cross-reference
interchangeable
K596Interchangeable
interchangeable cross-reference
interchangeable
AA59649-633Interchangeable
interchangeable cross-reference
interchangeable
FFB187/01-633Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 121468?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 121468?
121468 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 121468?
There are 23 known substitutes for 121468: T43D-10MEGOHM-1PCT, 596, M43D10M0HMP0RM1PCT and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 121468?
121468 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0649. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 121468