PartsTable
Technical Data Sheet
Download PDF

1214413 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1214413: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.136 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.156 INCHES MINIMUM AND 9.219 INCHES MAXIMUM IN, aperture_width: 9.031 INCHES MINIMUM AND 9.094 INCHES MAXIMUM IN, overall_length: 11.031 INCHES MINIMUM AND 11.094 INCHES MAXIMUM IN, aperture_length: 10.906 INCHES MINIMUM AND 10.969 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-604-9713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1214413
NSN: 5330-00-604-9713
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.136 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.156 INCHES MINIMUM AND 9.219 INCHES MAXIMUM IN
aperture_width9.031 INCHES MINIMUM AND 9.094 INCHES MAXIMUM IN
overall_length11.031 INCHES MINIMUM AND 11.094 INCHES MAXIMUM IN
aperture_length10.906 INCHES MINIMUM AND 10.969 INCHES MAXIMUM IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
special_featuresHOLES DRILLED THROUGH GASKET SIDES 0.188 INCHES ABOVE BOTTOM EDGE IN
cross-sectional_thickness1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
NSN5330-00-604-9713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1214413 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 9.031 INCHES MINIMUM AND 9.094 INCHES MAXIMUM IN
•
APERTURE LENGTH: 10.906 INCHES MINIMUM AND 10.969 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH11.031 INCHES MINIMUM AND 11.094 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH9.156 INCHES MINIMUM AND 9.219 INCHES MAXIMUM IN
APERTURE WIDTH9.031 INCHES MINIMUM AND 9.094 INCHES MAXIMUM IN
APERTURE LENGTH10.906 INCHES MINIMUM AND 10.969 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESHOLES DRILLED THROUGH GASKET SIDES 0.188 INCHES ABOVE BOTTOM EDGE IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 1214413?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1214413?
1214413 is a GASKET.
What is the NSN for 1214413?
1214413 is cataloged in the U.S. Government catalog under NSN 5330-00-604-9713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1214413

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.