PartsTable
Technical Data Sheet
Download PDF

1213AS600-2 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1213AS600-2: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 6150 OVERALL, hole_diameter: 0.480 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN, overall_height: 0.087 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, hardness_rating: 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM, outside_diameter: 1.092 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-147-4918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1213AS600-2
NSN: 5310-01-147-4918
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 6150 OVERALL
hole_diameter0.480 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN
overall_height0.087 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM
outside_diameter1.092 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
style_designatorSPRING TENSION
surface_treatmentZINC OVERALL
material_thickness0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-18731 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-81562,CL 2,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-147-4918
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1213AS600-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-81562,CL 2,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPRING TENSION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18731 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.092 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.087 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-81562,CL 2,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPRING TENSION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18731 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.092 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL COMP 6150 OVERALL
HOLE DIAMETER0.480 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
AM281215Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1213AS600-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1213AS600-2?
1213AS600-2 is a WASHER,SPRING TENSION.
What parts can replace 1213AS600-2?
There is 1 known substitute for 1213AS600-2: AM281215. Substitute compatibility should be verified for your specific system.
What is the NSN for 1213AS600-2?
1213AS600-2 is cataloged in the U.S. Government catalog under NSN 5310-01-147-4918. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1213AS600-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.