PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 121244
121244 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR NATURAL, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-5569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
121244
NSN: 5340-00-200-5569
FSC: 5340
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR NATURAL
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
specification/standard_data80205-NAS 1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.611 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.423 INCHES NOMINAL IN
NSN5340-00-200-5569
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 121244 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.625 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
3038-9012PC4Upgraded Successor
successor cross-reference
successor
4Upgraded Successor
successor cross-reference
successor
6R4Upgraded Successor
successor cross-reference
successor
X900760Upgraded Successor
successor cross-reference
successor
121244Upgraded Successor
successor cross-reference
successor
A05764Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 121244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 121244?
121244 is a CLAMP,LOOP.
What parts can replace 121244?
There are 8 known substitutes for 121244: 3038-9012PC4, 4, 6R4 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 121244?
121244 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-5569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 121244

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026