PartsTable
Technical Data Sheet
12120 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- As replacement for lost or defective original power supplies<br>- Mains supply of 110 V – 240 V suitable for use worldwide in conjunction with country-specific adapter<br>- Hook and loop cable tie enables good cable management without tangled cables<br>- Extra low energy consumption<br>- Ideal as a second power supply unit for use at home, in the office or during travel This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-185-8514, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
12120
NSN: 5330-00-185-8514
FSC: 5330
CAGE: 88078 — CASHCO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.190 INCHES NOMINAL IN
head_styleKNURLED NO. 4
design_typeHAND
head_height0.500 INCHES NOMINAL IN
point_styleUNIVERSAL
point_length0.240 INCHES NOMINAL IN
thread_class2A A
usage_designFOR GLAZING WOOD SASHES; FOR APPLICATION WITH PUTTY KNIFE
bore_diameter0.1200 INCHES MINIMUM AND 0.1210 INCHES MAXIMUM IN
head_diameter1.250 INCHES NOMINAL IN
overall_width0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
NSN5330-00-185-8514
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12120 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CRITICALITY CODE JUSTIFICATION: ZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
12-120Interchangeable
interchangeable cross-reference
interchangeable
33Interchangeable
interchangeable cross-reference
interchangeable
TT-P-791Interchangeable
interchangeable cross-reference
interchangeable
A-A-378 TY2Interchangeable
interchangeable cross-reference
interchangeable
1452Interchangeable
interchangeable cross-reference
interchangeable
12130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12120?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12120?
12120 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Hama.
What parts can replace 12120?
There are 13 known substitutes for 12120: 12-120, 33, TT-P-791 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12120?
12120 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-185-8514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12120