PartsTable / O-RING / 120R1 CLASS 1 SIZE 020MIL-G-1149
120R1 CLASS 1 SIZE 020MIL-G-1149 — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5331-00-869-3087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
120R1 CLASS 1 SIZE 020MIL-G-1149
NSN:5331-00-869-3087 FSC:5331 — O-RING CAGE:0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR
temp_rating
-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating
70.0 SHORE DUROMETER A NOMINAL
outside_diameter
0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
center_hole_diameter
0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
cross-sectional_height
0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN
5331-00-869-3087
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
TEMP RATING: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 120R1 CLASS 1 SIZE 020MIL-G-1149?
120R1 CLASS 1 SIZE 020MIL-G-1149 is a O-RING.
What parts can replace 120R1 CLASS 1 SIZE 020MIL-G-1149?
There are 6 known substitutes for 120R1 CLASS 1 SIZE 020MIL-G-1149: 9155344, 2-020C147-7, 11-020 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 120R1 CLASS 1 SIZE 020MIL-G-1149?
120R1 CLASS 1 SIZE 020MIL-G-1149 is cataloged in the Federal Logistics Information System under NSN 5331-00-869-3087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.
Request a Quote — 120R1 CLASS 1 SIZE 020MIL-G-1149