PartsTable
Technical Data Sheet
Download PDF

12087-5 — SWITCH,ROTARY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

12087-5: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.093 INCHES NOMINAL SINGLE ACTUATOR IN, mounting_pad: NOT INCLUDED, shaft_length: 0.325 INCHES NOMINAL SINGLE ACTUATOR IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-655-7761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 12087-5
NSN: 5340-00-655-7761
NIINs: 006557761, 012772909
FSC: 5340 — Hardware, Commercial
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.093 INCHES NOMINAL SINGLE ACTUATOR IN
mounting_padNOT INCLUDED
shaft_length0.325 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width0.687 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
pole_quantity2 SINGLE SECTION PERIPHERY
thread_length0.300 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length1.575 INCHES NOMINAL IN
shaft_diameter0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SINGLE ACTUATOR IN
NSN5340-00-655-7761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12087-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.172 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
CUSHION: NOT INCLUDED
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH2.312 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
OVERALL WIDTH0.687 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
MATERIAL THICKNESS0.172 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.062 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
7062946Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM760Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS35140-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340006557761Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12087-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12087-5?
12087-5 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12087-5?
There are 4 known substitutes for 12087-5: 7062946, NASM760, MS35140-12 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12087-5?
12087-5 is cataloged in the U.S. Government catalog under NSN 5340-00-655-7761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12087-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.