PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1207SS
1207SS ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1207SS
NSN: 3110-00-155-6683
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-155-6683
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1207SS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
SHIELD QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SHIELD QUANTITY2
LOAD DIRECTIONRADIAL
MATERIALSTEEL OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
B10751Interchangeable
interchangeable cross-reference
interchangeable
77-207Interchangeable
interchangeable cross-reference
interchangeable
901207Interchangeable
interchangeable cross-reference
interchangeable
83209M1Interchangeable
interchangeable cross-reference
interchangeable
7207Interchangeable
interchangeable cross-reference
interchangeable
650022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1207SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1207SS?
1207SS is a BEARING,BALL,ANNULAR.
What parts can replace 1207SS?
There are 14 known substitutes for 1207SS: B10751, 77-207, 901207 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1207SS?
1207SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1207SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026