120757: SHACKLE.
The SHACKLE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.
Government catalog under NSN 5305-00-012-0757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| thread_class | 2A A |
| head_diameter | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| thread_length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| fastener_length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| thread_direction | RIGHT-HAND |
| countersink_angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| internal_drive_style | SLOT |
| nominal_thread_diameter | 0.190 INCHES IN |
| screw_surface_treatment | CADMIUM AND CHROMATE OR ZINC AND CHROMATE |
| minimum_tensile_strength | 60000 POUNDS PER SQUARE INCH LBS |
| thread_quantity_per_inch | 32 |
| NSN | 5305-00-012-0757 |
| SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE |
| FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC ALL MATERIAL RESPONSES |
| THREAD LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.190 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| NONDEFINITIVE SPEC/STD DATA | I TYPE AND 2S STYLE |
| SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 |
| MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH LBS |