PartsTable
Technical Data Sheet
Download PDF

12073-A3124-1A — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12073-A3124-1A: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL THREADED STUD, thread_class: 2A A, overall_length: 5.310 INCHES NOMINAL IN, handle_clearance: 2.190 INCHES NOMINAL IN, special_features: 90.0 DEG SWING ANGLE, surface_treatment: ANODIZE HANDLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-373-0083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12073-A3124-1A
NSN: 5340-00-373-0083
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL THREADED STUD
thread_class2A A
overall_length5.310 INCHES NOMINAL IN
handle_clearance2.190 INCHES NOMINAL IN
special_features90.0 DEG SWING ANGLE
surface_treatmentANODIZE HANDLE
nominal_thread_size0.312 INCHES IN
mounting_facility_length0.630 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A581 ASSN STD SINGLE MATERIAL RESPONSE THREADED STUD
surface_treatment_document_and_classificationMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
NSN5340-00-373-0083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12073-A3124-1A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 5.000 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 0.630 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE THREADED STUD
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE THREADED STUD
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH5.000 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH0.630 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581 ASSN STD SINGLE MATERIAL RESPONSE THREADED STUD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225 FED SPEC ALL MATERIAL RESPONSES OR QQ-A-200 FED SPEC ALL MATERIAL RESPONSES HANDLE
OVERALL LENGTH5.310 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.312 INCHES IN
HANDLE CLEARANCE2.190 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
82381-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
12073-9600A3124-1AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12073-A3124-1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12073-A3124-1A?
12073-A3124-1A is a HANDLE,BOW.
What parts can replace 12073-A3124-1A?
There are 2 known substitutes for 12073-A3124-1A: 82381-1, 12073-9600A3124-1A. Substitute compatibility should be verified for your specific system.
What is the NSN for 12073-A3124-1A?
12073-A3124-1A is cataloged in the U.S. Government catalog under NSN 5340-00-373-0083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12073-A3124-1A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.