PartsTable
Technical Data Sheet
Download PDF

12070-SS-3724 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12070-SS-3724: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include length: 3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN, material: STEEL COMP 303 OVERALL, thread_class: 2A A, overall_height: 1.819 INCHES MINIMUM AND 1.881 INCHES MAXIMUM IN, mounting_method: THREADED SHAFT, special_features: DRAWING NAME HANDLE,BOW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-428-9653, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12070-SS-3724
NSN: 5340-01-428-9653
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
materialSTEEL COMP 303 OVERALL
thread_class2A A
overall_height1.819 INCHES MINIMUM AND 1.881 INCHES MAXIMUM IN
mounting_methodTHREADED SHAFT
special_featuresDRAWING NAME HANDLE,BOW
style_designatorRECTANGULAR SWIVEL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE SPRING
nominal_thread_size0.375 INCHES IN
end_item_identificationPACER DAWN
mounting_facility_length0.625 INCHES NOMINAL IN
NSN5340-01-428-9653
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12070-SS-3724 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
LENGTH: 3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
•
MOUNTING FACILITY LENGTH: 0.625 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED SHAFT
•
STYLE DESIGNATOR: RECTANGULAR SWIVEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.819 INCHES MINIMUM AND 1.881 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY2
LENGTH3.969 INCHES MINIMUM AND 4.031 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PIN
MOUNTING FACILITY LENGTH0.625 INCHES NOMINAL IN
MOUNTING METHODTHREADED SHAFT
STYLE DESIGNATORRECTANGULAR SWIVEL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
7571868P8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 12070-SS-3724?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12070-SS-3724?
12070-SS-3724 is a HANDLE,BAIL.
What parts can replace 12070-SS-3724?
There is 1 known substitute for 12070-SS-3724: 7571868P8. Substitute compatibility should be verified for your specific system.
What is the NSN for 12070-SS-3724?
12070-SS-3724 is cataloged in the U.S. Government catalog under NSN 5340-01-428-9653. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12070-SS-3724

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.