PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1205SA
1205SA ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 15.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-6072, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1205SA
NSN: 3110-00-554-6072
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width15.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresTHE RETAINER IS MADE OF NONMETALLIC MATERIAL
style_designatorNON-SEPARABLE
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-554-6072
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1205SA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL COMP E52100 RETAINER
•
STYLE DESIGNATOR: NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL COMP E52100 RETAINER
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL COMP E52100 INNER RING
MATERIALSTEEL COMP E52100 OUTER RING
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
303SFF01L0AG06A20C000000Interchangeable
interchangeable cross-reference
interchangeable
P303KDDFS50160Interchangeable
interchangeable cross-reference
interchangeable
6303-2ZJC3D0LBInterchangeable
interchangeable cross-reference
interchangeable
6799Interchangeable
interchangeable cross-reference
interchangeable
S16002Interchangeable
interchangeable cross-reference
interchangeable
205ME105B304A14S4000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1205SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1205SA?
1205SA is a BEARING,BALL,ANNULAR.
What parts can replace 1205SA?
There are 29 known substitutes for 1205SA: 303SFF01L0AG06A20C000000, P303KDDFS50160, 6303-2ZJC3D0LB and 26 more. Substitute compatibility should be verified for your specific system.
Is 1205SA still available?
1205SA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1205SA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026