PartsTable
Technical Data Sheet
Download PDF

1205-F-2684S — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1205-F-2684S: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE BODY, overall_height: 27.6 MILLIMETERS MINIMUM AND 28.4 MILLIMETERS MAXIMUM MM, style_designator: THRU-HOLE, material_thickness: 2.0 MILLIMETERS NOMINAL MM, end_item_identification: LIGHT ARMOURED BEHICLE, CANADIAN GENERAL MOTORS, LAV III. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-527-5383, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1205-F-2684S
NSN: 5340-01-527-5383
FSC: 5340 — Hardware, Commercial
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE BODY
overall_height27.6 MILLIMETERS MINIMUM AND 28.4 MILLIMETERS MAXIMUM MM
style_designatorTHRU-HOLE
material_thickness2.0 MILLIMETERS NOMINAL MM
end_item_identificationLIGHT ARMOURED BEHICLE, CANADIAN GENERAL MOTORS, LAV III
NSN5340-01-527-5383
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1205-F-2684S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL THICKNESS: 2.0 MILLIMETERS NOMINAL MM
•
MATERIAL: RUBBER SILICONE BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT27.6 MILLIMETERS MINIMUM AND 28.4 MILLIMETERS MAXIMUM MM
STYLE DESIGNATORTHRU-HOLE
MATERIAL THICKNESS2.0 MILLIMETERS NOMINAL MM
END ITEM IDENTIFICATIONLIGHT ARMOURED BEHICLE, CANADIAN GENERAL MOTORS, LAV III
MATERIALRUBBER SILICONE BODY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1205-F-2684Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1205-F-2684S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1205-F-2684S?
1205-F-2684S is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 1205-F-2684S?
There is 1 known substitute for 1205-F-2684S: 1205-F-2684. Substitute compatibility should be verified for your specific system.
What is the NSN for 1205-F-2684S?
1205-F-2684S is cataloged in the U.S. Government catalog under NSN 5340-01-527-5383. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1205-F-2684S