PartsTable
Technical Data Sheet
Download PDF

1205-2.75-02 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1205-2.75-02: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include plate_width: 2.688 INCHES NOMINAL IN, plate_length: 2.000 INCHES NOMINAL IN, inside_length: 2.750 INCHES NOMINAL IN, stock_diameter: 0.250 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE, special_features: FOUR MTG HOLES; MTG PLATE 0.058 IN. THK STOCK IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-285-6746, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1205-2.75-02
NSN: 5340-01-285-6746
NIINs: 012856746, 014317465
FSC: 5340 — Hardware, Commercial
CAGE: 03007 — H. A. GUDEN COMPANY, INC. (USA)
SPECIFICATIONS
plate_width2.688 INCHES NOMINAL IN
plate_length2.000 INCHES NOMINAL IN
inside_length2.750 INCHES NOMINAL IN
stock_diameter0.250 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
special_featuresFOUR MTG HOLES; MTG PLATE 0.058 IN. THK STOCK IN
style_designatorDELTA OPEN
mounting_plate_styleRAISED
NSN5340-01-285-6746
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1205-2.75-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE LENGTH: 2.000 INCHES NOMINAL IN
•
INSIDE LENGTH: 2.750 INCHES NOMINAL IN
•
MOUNTING METHOD: MOUNTING PLATE
•
PLATE WIDTH: 2.688 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DELTA OPEN
•
STOCK DIAMETER: 0.250 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RAISED
TECHNICAL CHARACTERISTICS
PLATE LENGTH2.000 INCHES NOMINAL IN
INSIDE LENGTH2.750 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
PLATE WIDTH2.688 INCHES NOMINAL IN
STYLE DESIGNATORDELTA OPEN
STOCK DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESFOUR MTG HOLES; MTG PLATE 0.058 IN. THK STOCK IN
MOUNTING PLATE STYLERAISED
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1205-2.75-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1205-2.75-02?
1205-2.75-02 is a HANDLE,BAIL.
What is the NSN for 1205-2.75-02?
1205-2.75-02 is cataloged in the U.S. Government catalog under NSN 5340-01-285-6746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1205-2.75-02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.