1204458: RELAY,ELECTROMAGNETIC.
The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, time_delay: 0.05 SECONDS MAXIMUM FIXED RELEASE TIME, cubic_measure: 42.471 CUBIC INCHES, overall_width: 3.281 INCHES MINIMUM AND 3.343 INCHES MAXIMUM IN, overall_height: 2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN, overall_length: 5.031 INCHES MINIMUM AND 5.092 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5945-01-288-6244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| duty_type | CONTINUOUS |
| time_delay | 0.05 SECONDS MAXIMUM FIXED RELEASE TIME |
| coil_quantity | 1 |
| cubic_measure | 42.471 CUBIC INCHES |
| overall_width | 3.281 INCHES MINIMUM AND 3.343 INCHES MAXIMUM IN |
| overall_height | 2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN |
| overall_length | 5.031 INCHES MINIMUM AND 5.092 INCHES MAXIMUM IN |
| winding_quantity | 1 |
| frequency_in_hertz | 60.0 NOMINAL |
| end_item_identification | ACL AND ELITE SYSTEMS |
| environmental_protection | SHOCK PROOF AND VIBRATION PROOF |
| mounting_facility_pattern | RECTANGULAR SINGLE MOUNTING FACILITY |
| NSN | 5945-01-288-6244 |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY |
| OVERALL HEIGHT | 2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC |
| MOUNTING FACILITY PATTERN | RECTANGULAR SINGLE MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.547 INCHES MINIMUM AND 4.577 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 20.0 AMPERES AC RESISTIVE LOAD |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 20.0 AMPERES AC INDUCTIVE LOAD |
| DUTY TYPE | CONTINUOUS |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.207 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| OVERALL LENGTH | 5.031 INCHES MINIMUM AND 5.092 INCHES MAXIMUM IN |