PartsTable
Technical Data Sheet
Download PDF

12022P11 — CUP,COMPRESSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12022P11: CUP,COMPRESSION.

The CUP,COMPRESSION is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, overall_length: 0.313 INCHES NOMINAL IN, feather_edge_angle: 25.0 DEGREES NOMINAL, center_hole_diameter: 1.125 INCHES NOMINAL IN, recess_inside_diameter: 0.938 INCHES NOMINAL IN, base_material_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-275-6129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12022P11
NSN: 5340-00-275-6129
FSC: 5340 — Hardware, Commercial
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
materialRUBBER OVERALL
overall_length0.313 INCHES NOMINAL IN
feather_edge_angle25.0 DEGREES NOMINAL
center_hole_diameter1.125 INCHES NOMINAL IN
recess_inside_diameter0.938 INCHES NOMINAL IN
base_material_thickness0.125 INCHES NOMINAL IN
NSN5340-00-275-6129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12022P11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATHER EDGE ANGLE: 25.0 DEGREES NOMINAL
•
CENTER HOLE DIAMETER: 1.125 INCHES NOMINAL IN
•
BASE MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
•
RECESS INSIDE DIAMETER: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FEATHER EDGE ANGLE25.0 DEGREES NOMINAL
OVERALL LENGTH0.313 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.125 INCHES NOMINAL IN
BASE MATERIAL THICKNESS0.125 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
RECESS INSIDE DIAMETER0.938 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 12022P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12022P11?
12022P11 is a CUP,COMPRESSION.
What is the NSN for 12022P11?
12022P11 is cataloged in the U.S. Government catalog under NSN 5340-00-275-6129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12022P11