Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, overall_width: 8.875 INCHES NOMINAL IN, aperture_width: 8.250 INCHES NOMINAL IN, overall_length: 9.750 INCHES NOMINAL IN, aperture_length: 9.125 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-472-3023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→1201334
NSN:5330-00-472-3023 FSC:5330 CAGE:10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OVERALL
overall_width
8.875 INCHES NOMINAL IN
aperture_width
8.250 INCHES NOMINAL IN
overall_length
9.750 INCHES NOMINAL IN
aperture_length
9.125 INCHES NOMINAL IN
hardness_rating
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features
T10, 250V MAIN FUSE V
style_designator
NON-CIRCULAR
inside_corner_radius
1.562 INCHES NOMINAL IN
outside_corner_radius
1.875 INCHES NOMINAL IN
end_item_identification
6530-01-463-6823 PATIENT WARMING UNIT
cross-sectional_thickness
0.062 INCHES NOMINAL IN
NSN
5330-00-472-3023
COMPONENT DIAGRAM
KEY FEATURES
•
APERTURE LENGTH: 9.125 INCHES NOMINAL IN
•
APERTURE WIDTH: 8.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 1.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
INSIDE CORNER RADIUS: 1.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH
9.125 INCHES NOMINAL IN
APERTURE WIDTH
8.250 INCHES NOMINAL IN
OVERALL LENGTH
9.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS
1.875 INCHES NOMINAL IN
OVERALL WIDTH
8.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
INSIDE CORNER RADIUS
1.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1201334?
1201334 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1201334?
There are 3 known substitutes for 1201334: 100909, 5920NCM141165, LL-H56-0991. Substitute compatibility should be verified for your specific system.
What is the NSN for 1201334?
1201334 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-472-3023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.