PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1201065
1201065 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.380 INCHES NOMINAL IN, closed_length: 23.000 INCHES NOMINAL IN, extended_length: 45.000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), side_for_which_designed: LEFT HAND OR RIGHT HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-538-7133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1201065
NSN: 5340-00-538-7133
FSC: 5340
CAGE: 05236 — JONATHAN ENGINEERED SOLUTIONS CORP. DBA JONATHAN ENGINEERED SOLUTIONS (USA)
SPECIFICATIONS
width0.380 INCHES NOMINAL IN
closed_length23.000 INCHES NOMINAL IN
extended_length45.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
side_for_which_designedLEFT HAND OR RIGHT HAND
NSN5340-00-538-7133
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1201065 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
CLOSED LENGTH: 23.000 INCHES NOMINAL IN
•
EXTENDED LENGTH: 45.000 INCHES NOMINAL IN
•
SIDE FOR WHICH DESIGNED: LEFT HAND OR RIGHT HAND
•
WIDTH: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
CLOSED LENGTH23.000 INCHES NOMINAL IN
EXTENDED LENGTH45.000 INCHES NOMINAL IN
SIDE FOR WHICH DESIGNEDLEFT HAND OR RIGHT HAND
WIDTH0.380 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1202065Interchangeable
interchangeable cross-reference
interchangeable
022467Interchangeable
interchangeable cross-reference
interchangeable
1619280Interchangeable
interchangeable cross-reference
interchangeable
J514Interchangeable
interchangeable cross-reference
interchangeable
N000287Interchangeable
interchangeable cross-reference
interchangeable
791667-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1201065?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1201065?
1201065 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 1201065?
There are 6 known substitutes for 1201065: 1202065, 022467, 1619280 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1201065?
1201065 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-538-7133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1201065

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026