PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12007652
12007652 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include ring_style: CONCENTRIC, inside_diameter: 1.375 INCHES NOMINAL IN, outside_diameter: 1.677 INCHES NOMINAL IN, outer_edge_thickness: 0.104 INCHES NOMINAL IN, cross-sectional_shape_style: PLAIN RECTANGULAR, STRAIGHT FACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-051-9521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12007652
NSN: 5330-01-051-9521
FSC: 5330
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
ring_styleCONCENTRIC
inside_diameter1.375 INCHES NOMINAL IN
outside_diameter1.677 INCHES NOMINAL IN
outer_edge_thickness0.104 INCHES NOMINAL IN
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-01-051-9521
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12007652 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RING STYLE: CONCENTRIC
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTER EDGE THICKNESS: 0.104 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.677 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RING STYLECONCENTRIC
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTER EDGE THICKNESS0.104 INCHES NOMINAL IN
INSIDE DIAMETER1.375 INCHES NOMINAL IN
OUTSIDE DIAMETER1.677 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
85986W1ITEM28Interchangeable
interchangeable cross-reference
interchangeable
1154KITEM4Interchangeable
interchangeable cross-reference
interchangeable
591-5Interchangeable
IBM Hd SAS Aa Cable - 3 Meter
interchangeable
A-78114-01-PIECE 10Interchangeable
interchangeable cross-reference
interchangeable
959-15Interchangeable
interchangeable cross-reference
interchangeable
S11065-15-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12007652?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12007652?
12007652 is a RING,WIPER.
What parts can replace 12007652?
There are 6 known substitutes for 12007652: 85986W1ITEM28, 1154KITEM4, 591-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12007652?
12007652 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-051-9521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12007652

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026