PartsTable
Technical Data Sheet
Download PDF

12007649 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

12007649: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OR STEEL COMP 4140 OVERALL, nut_style: ROUND, nut_diameter: 6.500 INCHES NOMINAL IN, nut_thickness: 1.000 INCHES NOMINAL IN, thread_series: ACME, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-037-1622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12007649
NSN: 5310-01-037-1622
FSC: 5310 — Nuts and Washers
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OR STEEL COMP 4140 OVERALL
nut_styleROUND
nut_diameter6.500 INCHES NOMINAL IN
nut_thickness1.000 INCHES NOMINAL IN
thread_seriesACME
hardness_rating30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
special_featuresTWO 0.060 HOLES PLACED ON 45 DEGREE ANGLE 180 DEGREE FROM ONE OTHER ON PERIFERY OF NUT. HOLE CENTER LOCATED 0.190 INCHES FROM SLOTTED SIDE OF NUT IN
thread_directionRIGHT-HAND
drive_point_depth0.250 INCHES NOMINAL IN
drive_point_width0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size5.750 INCHES IN
NSN5310-01-037-1622
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12007649 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: ACME
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
•
THREAD PITCH DIAMETERS: +5.7083 TO 5.7191 INCHES IN
•
DRIVE POINT WIDTH: 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 5.750 INCHES IN
•
NUT DIAMETER: 6.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESACME
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
THREAD PITCH DIAMETERS+5.7083 TO 5.7191 INCHES IN
DRIVE POINT WIDTH0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE5.750 INCHES IN
NUT DIAMETER6.500 INCHES NOMINAL IN
DRIVE POINT DEPTH0.250 INCHES NOMINAL IN
NUT THICKNESS1.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12007649?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12007649?
12007649 is a NUT,PLAIN,ROUND.
What is the NSN for 12007649?
12007649 is cataloged in the U.S. Government catalog under NSN 5310-01-037-1622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12007649