120018 — CAPACITOR,FIXED,PLASTIC DIELECTR

✓ Government record, cited

Hama · MRO · MRO_GENERAL

PRODUCT OVERVIEW

120018: CAPACITOR,FIXED,PLASTIC DIELECTR.

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include height: 0.156 INCHES NOMINAL IN, diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 12.5 MILLIMETERS MAXIMUM MM, head_style: FLAT CHAMFER. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-420-9639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 120018

NSN: 5315-00-420-9639
NIINs: 004209639, 014111045, 015088916, 016091385, 016716318
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 72741 — DORMAN PRODUCTS, INC. DBA DORMAN (USA)

SPECIFICATIONS

height	0.156 INCHES NOMINAL IN
diameter	0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	12.5 MILLIMETERS MAXIMUM MM
head_style	FLAT CHAMFER
body_height	7.0 MILLIMETERS MAXIMUM MM
body_length	18.0 MILLIMETERS MAXIMUM MM
chamfer_length	0.109 INCHES NOMINAL IN
terminal_length	20.0 MILLIMETERS MINIMUM MM
actuation_method	TURBINE
liquid_flow_rate	2.5 GALLONS PER MINUTE MINIMUM AND 29.0 GALLONS PER MINUTE MAXIMUM
NSN	5315-00-420-9639

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.109 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 1.500 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL

•

FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.625 INCHES NOMINAL IN

•

DIAMETER: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.109 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	1.500 INCHES NOMINAL IN
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER	0.141 INCHES NOMINAL IN
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.625 INCHES NOMINAL IN
DIAMETER	0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
HEAD STYLE	FLAT CHAMFER
HEIGHT	0.156 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

C18Reference document

Same NSN cross-reference

Reference document — Secondary reference

2010556Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 120018?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 120018?

120018 is a CAPACITOR,FIXED,PLASTIC DIELECTR manufactured by Hama. It is classified as a MRO (MRO_GENERAL).

What parts can replace 120018?

There are 2 known substitutes for 120018: C18, 2010556. Substitute compatibility should be verified for your specific system.

What is the NSN for 120018?

120018 is cataloged in the U.S. Government catalog under NSN 5315-00-420-9639. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

120018 — CAPACITOR,FIXED,PLASTIC DIELECTR

Request a Quote — 120018