PartsTable
Technical Data Sheet
Download PDF

120-225C4R11 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

120-225C4R11: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: ROUND, head_height: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.5 INCHES NOMINAL IN, thread_length: 0.531 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-603-1198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
120-225C4R11
NSN: 5305-01-603-1198
FSC: 5305 — Screws
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleROUND
head_height0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.5 INCHES NOMINAL IN
thread_length0.531 INCHES NOMINAL IN
fastener_length0.704 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
special_featuresRIBBED CRUCIFORM RECESS PER NAS7100
thread_directionRIGHT-HAND
nominal_thread_diameter0.25 INCHES IN
thread_quantity_per_inch28
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5305-01-603-1198
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 120-225C4R11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.531 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.25 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
FASTENER LENGTH0.704 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
THREAD LENGTH0.531 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.25 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESRIBBED CRUCIFORM RECESS PER NAS7100
THREAD CLASS3A A
THREAD QUANTITY PER INCH28
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 120-225C4R11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 120-225C4R11?
120-225C4R11 is a SCREW,CAP,HEXAGON HEAD.
What is the NSN for 120-225C4R11?
120-225C4R11 is cataloged in the U.S. Government catalog under NSN 5305-01-603-1198. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 120-225C4R11