PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 120-01494
120-01494 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL, leg_length: 1.375 INCHES NOMINAL ALL ENDS IN, connection_type: THREADED INTERNAL PIPE ALL ENDS, connection_style: PLAIN (PIPE) ALL ENDS, nominal_thread_size: 0.500 INCHES ALL ENDS IN, thread_series_designator: NPT ALL ENDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-087-2411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
120-01494
NSN: 5340-01-087-2411
FSC: 5340
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
leg_length1.375 INCHES NOMINAL ALL ENDS IN
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN (PIPE) ALL ENDS
nominal_thread_size0.500 INCHES ALL ENDS IN
thread_series_designatorNPT ALL ENDS
nondefinitive_spec/std_data100 FIGURE
specification/standard_data81346-AST-269 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
pipe_wall_thickness_designation_for_which_designedSCHEDULE 80 ALL ENDS
NSN5340-01-087-2411
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 120-01494 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.196 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LENGTH: 3.520 INCHES NOMINAL IN
•
DISTANCE FROM END TO NEAREST BEND: 1.030 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
•
WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.196 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
LENGTH3.520 INCHES NOMINAL IN
DISTANCE FROM END TO NEAREST BEND1.030 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND PHOSPHATE OVERALL
WIDTH0.500 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
LOOP OPENING WIDTH0.680 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
805-005Interchangeable
interchangeable cross-reference
interchangeable
27231Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2464Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 120-01494?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 120-01494?
120-01494 is a COIL,RADIO FREQUENCY.
What parts can replace 120-01494?
There are 3 known substitutes for 120-01494: 805-005, 27231, ASTM D2464. Substitute compatibility should be verified for your specific system.
What is the NSN for 120-01494?
120-01494 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-087-2411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 120-01494

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026