12-712051-07 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

12-712051-07: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.750 INCHES NOMINAL IN, body_height: 0.750 INCHES NOMINAL IN, body_length: 3.690 INCHES NOMINAL IN, cubic_measure: 2.076 CUBIC INCHES, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-294-9381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 12-712051-07

NSN: 5905-01-294-9381
FSC: 5905 — Resistor
CAGE: 52414 — EMERSON ELECTRIC CO COMPUTER POWER DIV (USA)

SPECIFICATIONS

body_width	0.750 INCHES NOMINAL IN
body_height	0.750 INCHES NOMINAL IN
body_length	3.690 INCHES NOMINAL IN
cubic_measure	2.076 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCAPSULATED
terminal_width	0.250 INCHES NOMINAL IN
terminal_length	0.560 INCHES NOMINAL IN
special_features	ONE MOUNTING HOLE AND ONE SLOT 0.195 DIA
style_designator	TERMINALS ONE EDGE
mounting_hole_size	0.195 INCHES NOMINAL IN
electrical_resistance	1.500 KILOHMS
NSN	5905-01-294-9381

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -5.000 TO 5.000

•

ELECTRICAL RESISTANCE: 1.500 KILOHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

MOUNTING HOLE SIZE: 0.195 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 4.090 INCHES MINIMUM AND 4.150 INCHES MAXIMUM IN

•

TERMINAL LENGTH: 0.560 INCHES NOMINAL IN

•

BODY WIDTH: 0.750 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-5.000 TO 5.000
ELECTRICAL RESISTANCE	1.500 KILOHMS
INCLOSURE TYPE	ENCAPSULATED
MOUNTING HOLE SIZE	0.195 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	4.090 INCHES MINIMUM AND 4.150 INCHES MAXIMUM IN
TERMINAL LENGTH	0.560 INCHES NOMINAL IN
BODY WIDTH	0.750 INCHES NOMINAL IN
BODY HEIGHT	0.750 INCHES NOMINAL IN
STYLE DESIGNATOR	TERMINALS ONE EDGE

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 1

12M59-1500Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 12-712051-07?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 12-712051-07?

12-712051-07 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 12-712051-07?

There is 1 known substitute for 12-712051-07: 12M59-1500. Substitute compatibility should be verified for your specific system.

What is the NSN for 12-712051-07?

12-712051-07 is cataloged in the U.S. Government catalog under NSN 5905-01-294-9381. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

12-712051-07 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 12-712051-07